hourtown50

Door Handle Replacement Door handles appear to be something minor however, if you don't like the appearance of the handles or are unable to use them, it's worth replacing them. Installing a new door handle is simple if you have patience. Modern door handles are usually equipped with cover plates which hide the screws for a more attractive appearance. However, you'll have to attach them separately if the new handle doesn't have them attached already. Removal of the Old Handle The door handle isn't just a decorative feature for your home It's also a safety feature that allows you to lock and unlock the door. As time passes the door handle could become loose or feel loose. It might also appear worn out and old. This is a clear indication that it's time to replace your door handle. If your door handle is becoming difficult to use, it might be time to replace it. This is a serious problem since you won't be able to lock or unlock the door which could put your family and yourself at risk. It's also a good idea to replace your door handle when it's damaged or broken. A damaged or broken door handle can be very dangerous, especially when your children or elderly family members struggle to open it, and get trapped in the. It's easy to replace a damaged handle on doors. Most modern door handles are a standard size, so they should fit any door. If you're not sure whether the new door handle you're buying will fit, try taking out the old one and measuring the holes in its housing. This will enable you to purchase the right size door handle. It is the easiest method to take off the old door handle by taking it off from the door. This is usually done with the screw driver. Some door handles have a cover plate which hides the mounting screws. You'll need to remove the cover plate to gain access to the screws. After you have removed the old handle, make a note of the way the spindle has been connected. This will aid in aligning the new handle. Alternately, you can take off the door handle by uncrewing it from the latch mechanism. You can use a screwdriver for removing the door handle. However, you will have to locate the tiny latch which is located on the edge trim piece. After you have removed the latch, take off the handle and the strike plate. Then, you can remove the latch from the door's edge. Remove the Strike Plate If you are replacing your handle, you'll also be required to replace the latch plate that holds the hole that the door's latch is inserted into when it closes. The new handles will come with two latch plates: a rectangular and circular plate (see the above diagram which shows the various parts of the door handle). If you have an old rectangular latch plate, you can replace it with a round one. repairmywindowsanddoors.co.uk will let the latch hook into the strike plate and make the handle easier. The first step is to remove the screw that holds the old latch plate. The screws are often quite tight and require a lot of force to loosen them. If you are able, it could be helpful to have another person assist with this part. After the screws are removed the latch should slide out of the door with ease. If it's stuck or won't move using a nail file to scratch around the edges of the latch plate. This may help free the plate. Now you can prepare the new strike plate to be installed. Utilizing the wood screws that came with the new handles, screw the latch plate to the inside of the doorjamb. Don't over tighten your screws because this could damage the strike plate. If you're not sure whether the latch plate is in its proper position, shut and open the door to see if it latches and closes properly. If it doesn't then you'll have to adjust the strike plate upwards or down, or move it forward or back until the door closes and latches correctly. If the door still moves or jiggles, you might need to increase the size of your latch hole on the strike plate. This is more prevalent in older doors, however it could be due to wear and tear hinge mortises that are too narrow or are not sized correctly for the latch, or because of a broken or damaged strike plate. If this is the situation then you should use a filing made of metal instead of a chisel or hammer to adjust the strike plate. Remove the Latch The latch is the metal piece that is angled that is able to move in and out of the hole in the inner edge of your door. The latch moves forward when you turn the handle. It also catches the door frame to ensure that the door is closed. If your door wobbles when you close it, an upgrade to the latch could be the only thing needed to fix the problem. It's hard to see the screws that hold the latch to the door, but there's usually a small slot on the trim plate that allows you to insert a screwdriver and pry it off. After removal of the trim plate you should be able to remove the latch as well as the bolts that hold it, as well as the spindle in position. If the latch isn't able to come out, try using an old-fashioned paper clip or tool to free it from the handle mechanism. Insert the item in the recessed slot of the latch and gently twist it or jiggle until the that the latch and handle are beginning to split. You may have repeat this process a few times before you are able to remove the latch. It should be possible to slide the new latch into its slot without any issues once you have removed the old one. Use the new screws to secure the latch to the strike plate or door frame. Make sure it is correctly placed in the slot, and aligned with the screw chambers. Before installing the new handle, make certain to measure your existing backset (the distance from the center of the large hole on the front surface of the door to the edge). Verify that the size of the latch of the new handle is equal to the measurement. You'll require a new cylinder for your lock if you're replacing the handle and latch, or your old one is damaged. If you're not replacing the locks, however, a new latch should fit in your existing recess, and work just fine with your current keys. Pick a latch that has rectangular cover plates that match your old handles. Removal of the Cover Plate You can replace your door handles with a modern lever and rose design to enhance the appearance of your house. You can purchase complete sets with matching escutcheons, privacy adaptors and escutcheons. To replace an internal door handle remove the cover plate (or rose) that covers the screws and inner mechanism. Use a flathead for removing the cover plate. It could have an opening on one side or be secured by a pin. Once the cover plate is removed, remove the screw that holds the interior handle in place and set it aside. Take off the screws that hold both the outer and inner plates. You can loosen them with the help of a Philips Screwdriver. Then, take the inner plates and latch plate from the door and put them aside. Some doors don't have this gap. If yours does not have a handle, you'll need to make a hole in the door to accommodate the new handle. The process for doing this is the same as for opening a door with a lock, but you'll have to be extra careful to avoid damaging the frame or door. Installing new screws for the door knob is necessary after the holes have been drilled. Buy the same dimensions as your old screws to prevent getting the handle too tight or loose. You'll also need to install an additional strike rod and latch plate, which aren't included with most door handle sets. Amazon's Choice FAERSI 2-piece chrome finish handle sets are a great alternative if you're in search of a top-quality interior door handle replacement set. It's a factory fit and has received hundreds of five-star reviews from satisfied customers. It's a great choice to replace worn or damaged door hardware on your Chevy.